Telstra tests CAT-M1 with Ericsson and Qualcomm Technologies using 700 MHz band

Telstra_LTEto5G.com

Australia —

Telstra along with Ericsson and Qualcomm Technologies has successfully executed network and device testing of data communications on Cat M1 with the MDM9206 modem, designed to support LTE Cat-M1 for Internet of Things (IoT) applications and services, utilizing the 700 MHz band (Band 28).

This commercial technical milestone was achieved through the successful interoperability testing of the MDM9206 modem, a product of Qualcomm Technologies, at Ericsson headquarters in Sweden and witnessed by executives from Telstra.

Amongst the key features of Cat-M1 LTE are:

  • Extended coverage with better link budget (up to 15 dB, compared to Cat-1) allowing LTE signals to penetrate through more walls and floors to reach devices deployed deep indoors or in remote locations
  • Up to 10 years of battery life for typical delay-tolerant, low-throughput applications utilizing Power Save Mode and Extended DRX
  • Lower complexity and cost due to single antenna and half duplex operation, up to 375 kbps

Mike Wright, Group Managing Director Networks, Telstra, says: “Cat-M1 is a significant step forward, towards delivering cellular-based IoT capabilities which extend the capabilities of Telstra’s mobile network. Cat-M1 will deliver both longer battery life and extended depth of coverage benefits that will be further complemented with the expected arrival of Narrowband IoT (Cat-NB1) devices later next year, along with a progression toward the greatly reduced module costs. Telstra expects its enterprise customers will greatly benefit from the productivity benefits Cat-M1, and later Cat-NB1, will support and looks forward to connecting a huge range of new and innovative IoT-enabled devices on the Telstra network.”

To achieve this important new network capability, Ericsson Networks Software 17A harnesses a combination of powerful software features to deliver extended coverage, lower device cost relative to Mobile Broadband devices, and overall lower power consumption. Collectively, these new capabilities will facilitate a boom in new devices connecting a range of internet connected “things”, driving productivity and creativity across a range of industries.

Thomas Norén, Head of Product Area Network Products, Ericsson, says: “Cat-M1 will enable operators to drive new opportunities in the fast-emerging IoT market, which Ericsson believes is a key component of the Networked Society. Once again, we are pleased to be working with Qualcomm Technologies and Telstra to pioneer another innovation into the LTE market.”

The Qualcomm Technologies MDM9206 modem is designed to support LTE category M1, upgradeable to LTE M1+ NB-1 dual mode with an anticipated upcoming software update. The dual-mode approach combines the best of both technologies and provides a global, scalable solution for IoT products, well suited for a diverse set of operator deployments. The category M1 and NB-1 LTE modes designed in the MDM9206 modem bring many enhancements and optimizations to LTE that will help reduce IoT device complexity. The new technologies can also co-exist with today’s LTE infrastructure and spectrum, which offers a superior solution to proprietary technologies for low-power wide-area networks.

Serge Willenegger, Senior Vice President, Product Management, Qualcomm Technologies, Inc., says: “We are very pleased with this successful testing of CAT M1 based on Qualcomm Technologies’ MDM9206 modem. This modem represents the company’s latest innovation supporting low-data, low-cost, low-power and low-bandwidth IoT applications and services. This is an important milestone that will also support the delivery of a new range of IoT services such as smart energy, asset tracking, industrial control and automation, building security, and more. We look forward to working with mobile technology leaders such as Ericsson and Telstra to bring these innovations to users around the world.”